Pido consejo, tengo que elegir una de las dos. La Orbea me sale por unos 230 y la Felt por unos 260, mas o menos. He mirado un poco y me parece que son parecidas. No obstante, voy a estudiarlas mas detenidamente y haber si alguien que conozca bien estas bicis me comenta algo. Gracias.
TUAREG CUADRO: ORBEA MTB ALU HORQUILLA: ZOOM 386 PLATO: PHAETON 150 24x34x42 W/PR DIRECCION: 1 1/8 AHEAD BLACK MANILLAR: STEEL MTB RAISED POTENCIA: 1 1/8 ALU BLACK MANETAS: SHIMANO STEF 50 FRENOS: ORBEA MTB V-BRAKE ALU CAMBIO: SHIMANO TX-31 DESVIADOR: SHIMANO C050 RUEDAS: ORBEA ALU TRACKS PIÑON: SHIMANO TZ31 14-34 7S CUBIERTA: ORBEA MTB 26x1.95 TIJA SILLIN: ORBEA BLACK SILLIN: MATCH LINE MTB PEDALES: VP 570
Felt Q-200 CUADRO: Felt 6061 Externally Butted Aluminum, Round Tapered Top Tube, A-Style Seatstay Design, Oversized Semi-Integrated Head Tube, Replaceable Derailleur Hanger, Rack & Fender Mounts, Basta-Lock, V-Brake and Disc Brake Compatible HORQUILLA: SR Suntour XCT-V2 80mm travel, Pre-load, Internal spring, Alloy Crown, Alloy lower with STKM Stanchions. With spring seal design. HEADSET Semi-Integrated 1-1/8" Aheadset--Steel Cups, Caged Bearing, with Alloy Laser Top Cap, Custom Curved 1 x 15mm + 2 x 5mm Straight Washers STEM FELT One-Piece Melt-Forged Design, 1-1/8" Threadless Aluminum, 4-Bolt, 15 Degree Rise. CP Hardware BLAST BLACK Extensions: 13.5/15.5/17.5=90mm; 19.5/21.5=110mm HANDLEBAR 30mm Rise, 6 degree Bend, with Felt Logos. Widths: 13.5-17.5=580mm; 19.5=600mm; 21.5=620mm GRIPS: Felt Dual-Density Extra-Soft & Sticky (Recipe #25)center with Hard Outer Durometer, 130mm Length, 30mm OD, Grey outer/Blk grip section BAR END CAPS Rubber Plugs w/ Felt logo Bubble Decal, Included w/Grip SHIFTERS Shimano Altus ST-EF50 EZ-Fire Plus, 21 Speed FRONT DERAILLEUR Shimano C051 Dual Pull REAR DERAILLEUR Shimano RD-M360 Acera CRANKSET SR/Suntour CW-XCC-T208PB Melt-Forged Aluminum, 48/38/28T Steel Rings. With Chain Guard. Lengths: 13.5-15.5=170mm; 17.5-21.5=175mm BB SET TH Cartridge Type, Cr-Mo Axle & Cup FREEWHEEL Sunrace 7-Speed Spin-On Type,14, 16, 18, 20, 22, 24, 28T, UCP Finish CHAIN: KMC/Shimano UG51 (7-Speed) Brown BRAKE LEVERS Shimano Altus, Integrated w/Shifters BRAKES: Tektro 855-AL, V-Type Brake, Aluminum Melt-Forged Arms, Linear Spring, Dual Spring Adjust, 110mm Arm (Fender Compatible) with Custom 60mm Pads and All-Black Hardware CABLES: Custom Felt Cable Set, Standard Black Casing, Featuring CP Stamped Logos & FELT Rubber 2-Tone Tube Tops at Head Tube and One Red CNC Alloy ferrule SADDLE: Felt "RXC" Comfort, Low Side Profile Look with Wide/Flat/Plush Top, Double-Density Base, Satin Steel Rails SEAT POST Felt Alloy Micro-Adjust, 100% Black, 6061 Low-Profile Forged Head & Extruded Rall Clamps, 27.2mm x 350mm (CEN) SEAT POST CLAMP Felt Bolt-Type with Logo, Cold Forged + CNC, 6061 Aluminum, with Steel Barrel Nut Design, 31.8mm F/HUB Aluminum Body 32H, with Alloy Q/R Levers R/HUB Aluminum Body 32H, Spin-On Freewheel Type, with Alloy Q/R Levers RIMS Alloy Doublewall, 26 x 1.5 x 32H, 23mm Width, Presta Valve, Black Anodized TIRE FELT THC XC Trail Highway City 26 x 2.1 30TPI Wire Bead, with Presta valve Inner Tubes SPOKES Sandblast Black Stainless 14G, Brass Nipples PEDALS MTB Design Steel Cage / PP Body
Estudiado el tema, creo que elegiré la Felt, que por un poquillo mas de pasta, tiene los componentes ligeramente mejores.
Y esta por 249 en territorio bike: Orbea Toubkal CUADRO: ORBEA MTB ALU HORQUILLA: ZOOM 386 PLATO: PHAETON 150 24x34x42 W/PR DIRECCION: 1 1/8 AHEAD BLACK MANILLAR: STEEL MTB RAISED POTENCIA: 1 1/8 ALU BLACK MANETAS: SHIMANO STEF 50 FRENOS: ORBEA MTB DISCO CAMBIO: SHIMANO ALTUS DESVIADOR: SHIMANO C050 RUEDAS: ORBEA ALU TRACKS PIÑON: SHIMANO TZ31 14-34 7S CUBIERTA: ORBEA MTB 26x1.95 TIJA SILLIN: ORBEA BLACK SILLIN: MATCH LINE MTB PEDALES: VP 570
La orbea Toubkal, es similar a la Tuareg, salvo que lleva frenos de disco mecánicos y mejora algo algún componente. Buena opción, calidad-precio y está chula. El precio de territorio no está mal. Mañana encargaré la felt.
