Teniendo al maestro Carbonius con sus "locuras" del tuneo y habiendo encontrado hoy una curiosa, que os parece un hilo sobre esos tuneos/ñapas/soluciones raras, sorprendentes que se salgan de lo mas o menos comun......... un mecanizado de un nucleo lo considero algo no muy raro Hoy he encontrado esto; unas manetas hidraulicas Sram con palancas de freno y Di2 Ultegra esto es lo que ha comentado de momento el "maestrillo" (en ingles) Well my set turned up and i have set to work on modding them to be operated by the Ultegra Di2 lever blade. I've got to say they are about the easiest levers i come across to strip down, remove the rubber hood cover and the 3 screws holding the cover plate on and the shift mechanism is exposed, remove the locking screw and screw an M2,5 bolt into the end of the shifters main pivot pin, withdraw the pin and then pretty much the whole shift mechanism and shift lever comes out in one, the brake lever blade much like Di2 is only retained by its pivot pin and an E clip, which the Shimano E clip tool removes easily. and an allen key is required to unscrew the barrel reach adjuster to remove the lever from the main body. i've modelled up a block to fit the cut down Shimano lever with the correct pivot points and it all works fine, So its now time to order the Glass filled Nylon parts. PD: Os parece bien el hilo, el titulo?
