VERTEBRAE ceramic housing

Tema en 'Bicis Ligeras' iniciado por madarixa, 2 Nov 2009.

  1. madarixa

    madarixa fO composite

    Registrado:
    4 Oct 2005
    Mensajes:
    1.693
    Me Gusta recibidos:
    121
    Ubicación:
    AQUI
    Pues quería saber si alguien los tiene y sus impresiones ya que mi primo (que parece que es rico el ******) quiere cambiar sus viejas fundas nokon carbon y estas parecen interesantes. Ademas me ha dicho que por buscarle inf. de fundas me dará sus nokon asi que todos tan contentos.

    Para los que sepan ingles (o que usen traductor como yo jeje):
    Vertebrae Ceramic Components Advantages of Vertebrae

    True “Compressionless” housing: High Purity Alumina is FIVE TO SIX TIMES STIFFER than aluminium alloys, and even 50 to 80 % stiffer than steel. OK, so theoretically it compresses a bit. But you won’t notice it. Honest. It is also FIVE TO SIX TIMES STRONGER in compression than both aluminium & steel.

    Effortless Gear Changes:Less force required to actuate gears + brakes, creating a “light-action” feel at the levers.

    Less Maintenance: Due to the compressionless housing and protective Spinal Wrap, derailleurs are not only easier to fine tune during setup (they’ll work over a wider range of cable tension), but that they also don’t need to be re-adjusted as often as other systems.

    Totally corrosion free!! High Purity Alumina is an extremely inert material. No coatings to peel off, no chipping and spalling paint. Zero corrosion for life!

    Lightweight: The density of alumina is only 3.65 to 3.85 g/cm3. This results in outstanding stiffness-to-weight and strength-weight ratios. Total weight of vértebræ ceramic housing is only 46 to 52 g/m.

    Enhanced Flexibility: The special segmented design is more flexible compared to traditional bowden cables; this design allows shorter cable routing using tighter-radius bends, resulting in less overall weight. Despite this, there is also reduced friction between the cable and liner, since the outer segments do not squash the inner cables like conventional housing.

    Low Friction: Ceramic materials have an inherently lower frction than metals. Combined with our stainless steel cables and teflon liner, this results in considerably less friction and practically zero wear.

    Extremely hard & durable: In fact, most engineering ceramics are so hard, they normally require different testing procedures to metals as it is not practical to make the same economical test specimens! In comparison with all metals, hardness is best described as “off the chart!”.


    Precios :eek:la2:
    Vertebrae Ceramic Components Buy
     

    Adjuntos:

    • ver.jpg
      ver.jpg
      Tamaño de archivo:
      47,7 KB
      Visitas:
      400
    • ver (1).jpg
      ver (1).jpg
      Tamaño de archivo:
      30,1 KB
      Visitas:
      399
    • ver (2).jpg
      ver (2).jpg
      Tamaño de archivo:
      32,5 KB
      Visitas:
      399
    • ver (3).jpg
      ver (3).jpg
      Tamaño de archivo:
      143,7 KB
      Visitas:
      399
    • ver (4).jpg
      ver (4).jpg
      Tamaño de archivo:
      70,8 KB
      Visitas:
      397
  2. luco_mtb_

    luco_mtb_ Novato

    Registrado:
    27 Dic 2006
    Mensajes:
    811
    Me Gusta recibidos:
    1
    Ubicación:
    cantabria
    estare atento ,pues de nuevas tiene que ser preciosas.

    eso si, en cuanto se meta un poco de mierdilla dentro del macarrón, no se como quedaran.
     
  3. nacholore

    nacholore Miembro

    Registrado:
    8 Dic 2005
    Mensajes:
    333
    Me Gusta recibidos:
    0
    Ubicación:
    Tenerife
    La persona que vende esas fundas es un australiano que vive en Tenerife y habla español, si quieres te dejo el mail y le preguntas. Eso si el peso es superior a las nokon.
     
  4. synchronicity

    synchronicity El encantador de bicis

    Registrado:
    16 Sep 2007
    Mensajes:
    39
    Me Gusta recibidos:
    0
    Ubicación:
    La Orotava, Tenerife.
    He mandado un juego a arueda.com hace unas semanas. A ver cuando hace la prueba... :-|

    El usario "Yeyo" ya ha comprado un kit y está interesado un comprar otros para su otra bici de carretera. :mrgreen:

    [​IMG]
     
    Última edición: 5 Nov 2009
  5. rallyator

    rallyator Miembro Reconocido

    Registrado:
    9 Feb 2007
    Mensajes:
    4.240
    Me Gusta recibidos:
    698
    Ubicación:
    En casa y alrededores.
    Después de tanto tiempo, ¿hay opiniones fundadas al respecto?. Saludos.
     

  6. rallyator

    rallyator Miembro Reconocido

    Registrado:
    9 Feb 2007
    Mensajes:
    4.240
    Me Gusta recibidos:
    698
    Ubicación:
    En casa y alrededores.

Compartir esta página