Me voy a comprar pa reyes la fit prk2, pero antes kiero ver los componentes k lleva. Soloo los encuentro en ingles o americano, y cuando los copio en el traductor, hay cosas ke no cuadran o se traducen de otra forma =S si alguien puede decirmeloo, se lo agradezco Saludos!
FRAME Frame: Fit design tig welded 20.5in T/T W/Mid BB Head Tube: Integrated Head Tube, W/Removable Gyro tabs Top Tube: 4130 Cromo Down Tube: 4130 Cromo Seat Tube: 1020 Hi Ten Steel Stays: 1020 Hi Ten Steel Drop Outs: 6mm 1020 hi Ten Steel, 14mm Axle slot Add-Ons: Cable stop under T/T, U-BRK mounts under seat stays FORK Fork: Fit design tig welded 20in wheel Steerer Tube: 2-PC 4130 Cromo Legs: 1 1/4in O.D. 4130 Cromo Drop Outs: 6mm 1020 Hi Ten steel, 16.5mm Safety drop out slot Top Cap/Bolts: Alloy cap/14mm hollow hex bolt, Black STEERING Handlebar: Fit tig welded 2pc, 1020 Hi Ten steel 7.75 bar Grips: Fit key logo alloy, Black ANO Headset: FSA Impact BRAKING Detangler: Complete gyro detangler set, Black Brake Lever: Tektro, Black Rear Brake: Tektro U-BRK W/Coil spring, Black Cable: Y-Cable, Black DRIVETRAIN Crankset: Forged/tubular Cromo 3pc, 175mm, Black Bottom Bracket: Sealed bearing mid BB Spindle: Included W/Crankset Chainwheel: 25T Steel Pedals: Alloy platform W/Cromo axle, 9/16in, Black KMC X410 1/2in x 1/8in Freewheel: 9T driver WHEELS Front Rim: Alienation PBR, 36H single wall, Blue Ano/Black Rear Rim: Alienation PBR, 36H single wall, Blue Ano/Black Front Hub: 14G x 36H alloy, sealed bearing, 14mm axle, Black Rear Hub: 14G x 36H alloy cassestte, 14mm axle, Black Spokes: Black 14G Nipples: Brass Front Tyre: Fit 20 x 2.10 Rear Tyre: Fit 20 x 1.95 Tubes/Rim Strips: 20 x 1.75 American valve/14mm Rim Strip SEATING Saddle: Short jump, 8mm rails and clamp, Black Seatpost: Steel micro adjust, 25.4 x 125mm, Black Seatpost clamp: 28.6mm ID, alloy, single 5mm bolt, Black sé mas o menos las ruedas, el asiento,k es d mi talla : d 20.5 y pesa 12.2 kg aproximadamente
